Combined WiFi/GPS antenna
Combined antenna for receiving signal in WiFi/GPS technologies. The antenna operates in 2400/5800/1575.42 MHz bands. In combination with an amplifier, this active antenna achieves a total gain of 30 dBi. Thanks to the ability to operate with the mentioned technologies is perfect for use in public transport and other means of transport. The antenna thanks to its robust construction it has high resistance to damage, dust and water (IP67) and is suitable for outdoor installation. It is supplied with RG316 and RG174 cables with a length of 5 m, with free ends.
Cable specifications RG316:
RG316 coaxial low-loss high-frequency cable that is compatible with connectors applicable to a cable with the outer diameter of 2.49 mm. The frequency range is 0 - 3 GHz. The RG316 cable is often used in radio frequency and telecommunication applications, for the transmission of high frequency signals, and also in wireless devices. It is suitable for applications that require good performance and stability in high temperature environments. The operating temperature of this cable is -55 to + 200 ° C. The shortening factor is set to 0.7.
Cable specifications RG174:
The cable labeled RG174 / U is a basic variant of a coaxial cable that is compatible with connectors applicable to a cable diameter of 2.8 mm. The characteristic impedance of the cable is 50 Ω. The reduction factor is fixed at 0.66. The operating temperature range is -20 to 80 °C.
It is most often used for creating cable adaptors with connectors such as BNC / FAKRA / FME / MCX / MMCX / N / SMA / SMB / SMP / TNC and others. It is ideal for short and bending stressed connections in measuring and telecommunications technology, for GPS / GSM / WLAN antennas, antenna leads etc.
Technical parameters can be found in the attached datasheet.